Monthly Archives: October 2015

6SN1123-1AA00-0LA1 Simodrive Power Module – Product Info

The Siemens 6SN1123-1AA00-0LA1 Simodrive Power Module is a standard power module for the Siemens Simodrive 611 Series. This Simodrive 611 power module is used for 1 axis control with a 108 amp rating. The power module has internal cooling. The motor rating currents are 1PH=45A, Asynchronous=45A. For more info you can check out all of our Siemens products on our website.

Continue reading 6SN1123-1AA00-0LA1 Simodrive Power Module – Product Info

6SN1123-1AA00-0EA1 Simodrive Power Module – Product Info

The Siemens 6SN1123-1AA00-0EA1 Simodrive Power Module is one of the most popular power modules in the Simodrive 611 series, commonly used with an axis control card. This is a Simodrive 611 power module with 1 axis and an 160 amp rating. This unit has internal cooling. The motor rated currents ate 1FT5=80A, 1FT6=56A, 1PH=60A, Induction Motor=60A. For more info you can check out all of our Siemens products on our website.

Continue reading 6SN1123-1AA00-0EA1 Simodrive Power Module – Product Info

6SN1145-1BA01-0BA1 Simodrive E/R Module – Product Info

The 6SN1145-1BA01-0BA1 Simodrive E/R Module is part of the Simodrive 611 Series. The Simodrive runs on 16/21KW internal power. It is an infeed and regenerative feedback module which is stabilized with internal cooling. It also includes a mains contactor with a break contact. For more info you can check out all of our Siemens products on our website.

Continue reading 6SN1145-1BA01-0BA1 Simodrive E/R Module – Product Info

6SN1145-1BA01-0DA1 Simodrive Feedback Module – Product Info

The Siemens 1P 6SN1145-1BA01-0DA1 Simodrive Feedback module is a Simodrive 611 infeed and regenerative feedback module. It runs with 55/71 KW and is stabilized with internal cooling. The mains contactor has a break contact as well. The 6SN1145-1BA01-0DA1 module was discontinued from Siemens in 2015, but stock is still available. For more info you can check out all of our Siemens products on our website.

Continue reading 6SN1145-1BA01-0DA1 Simodrive Feedback Module – Product Info

6SN1118-0NJ01-0AA1 Simodrive Axis Control – Product Info

The 6SN1118-0NJ01-0AA1 Simodrive Axis Control card is used for 1 axis control. It is used with a loop lock resolver and has the ability for speed and torque to be set by options in the control card. A picture of the 6SN1118-0NJ01-0AA1 is below, for more info on it and our other Siemens products please visit our website.

Continue reading 6SN1118-0NJ01-0AA1 Simodrive Axis Control – Product Info

6SN1121-0BA11-0AA1 Siemens Spindle Control – Product Info

The 6SN1121-0BA11-0AA1 Siemens Spindle Control is used with 1PH induction motors with optical rotary encoders or inductive toothed wheel encoders. The interface X432 can be used either as spindle encoder input for positioning or as a WSG interface, which is the rotary position output to the NC. Check out all of our Siemens products on our website.

Continue reading 6SN1121-0BA11-0AA1 Siemens Spindle Control – Product Info

6SN1145-1BB00-0EA1 Simodrive Infeed Module – Product Info

The 6SN1145-1BB00-0EA1 Simodrive Infeed module is a 80/104 KW closed look control unit. The module uses internal cooling. The unit weighs about 45lbs and a picture of the drive is below. You can see all of our Siemens products on our site. To order a replacement drive you can call in at 1-800-691-8511 or email sales@mroelectric.com.

 

 

 

6FC5357-0BB25-0AA0 Sinumerik NCU – Product Info

The 6FC5357-0BB25-0AA0 Sinumerik NCU is a Sinumerik 840DE NCU with version 572.5. The processing speed is 400MHZ and it has 64MB of memory. The 6FC5357-0BB25-0AA0 does not come with system software. The memory is NC 3MB and PLC 128KB. The control card comes prepared for Profibus-DP. A picture of the board is below, for more info you can check out our product page here. To contact us about ordering this Sinumerik NC you can email sales@mroelectric.com or call 800-691-8511.

 

6FC5203-0AF03-0AA0 Sinumerik OP 015 – Product Info

The 6FC5203-0AF03-0AA0 Sinumerik OP 015 is an operator panel front with 15 inch TFT color display and a resolution of 1024 x 768 pixels. The operator panel also features 8 + 4 horizontal and 8 vertical membrane softkeys. The KB 483C full CNC keyboard can be used as an input keyboard. This operator panel front is mounted from the rear using the clamps supplied with the panel. The 6FC5203-0AF03-0AA0 is very user friendly for control and monitoring thanks to the 15 inch display. It also has ergonomic and reliable operation thanks to the full CNC keyboard. The Sinumerik OP 015 can be used for Sinumerik 810D powerline, Sinumerik 840Di, Sinumerik 840D sl, or Sinumerik PCU 321. A picture of the operator panel is below, for more info you can check out our product page here. To contact us for ordering info you can email sales@mroelectric.com or call 1-800-691-8511.

 

 

6FC5210-0DF22-2AA0 Sinumerik PCU – Product Info

The Siemens 6FC5210-0DF22-2AA0 is a Sinumerik PCU 50 with 1.2 GHZ processing speed. This Sinumerik PCU also has 256 MB of RAM and is powered by 24V DC. It comes loaded to run with Windows XP professional for embedded systems. A picture of the unit is below, for more information or to find the 6FC5210-0DF22-2AA0 for sale,  you can visit the product page on our site here. You can also contact us at sales@mroelectric.com or call 1-800-691-8511.