Tag Archives: α series

Fanuc A06B-6089-H105 Servo Amplifier – Product Info

The Fanuc Servo Amplifier A06B-6089-H105 is an SVU α series control motor amplifier unit. It can be used within systems with one or two feed axes. This amplifier has an integrated power supply to accommodate smaller systems. The A06B-6089-H105 servo amplifier is in compliance with VDE 0160, UL, and CSA safety standards. For more information please visit our product page below, or check out all of our FANUC products on our website.

Continue reading Fanuc A06B-6089-H105 Servo Amplifier – Product Info

Replacing Fanuc C Series Servo Amplifiers with α Series Servo Amplifiers

If you experience a system failure due to a Fanuc C series servo amplifier, (A06B-6066-H002, H003 etc.) you may feel like your only option is to replace it with the same exact unit. However Fanuc also offers the α series servo amplifiers which features improvements over the C series. In most cases you can replace your C series servo amplifier with the α series servo amplifier that has the identical final four numbers of the C series model number. The chart below outlines this:

The advantages of replacing your C series amplifier with an α series amplifier are:

  • A built in power supply
  • A second interface, type B, as well as the more conventional type A interface
  • Updated power device, intelligent power module, to reduce power loss and increasing reliability

α series amplifiers are also designed with the same dimensions as the C series so that you can install them into your current system easier.

Go to our website to check out our selection of C series and α series FANUC amplifiers.