Electronically coordinated single-motor drives work in unison to perform your all of your drive needs. In multi-axis drives, the individual drives are controlled from a higher-level control system in a way to achieve the desired coordinated movement. A centralized Siemens SINAMICS Control Unit has control over the drives for all connected axes and also establishes the links between the drives and/or axes. Since all required data is stored in the central Control Unit, it does not need to be transferred. The CU310-2 is used in conjunction with power modules and single-motor drives whereas the CU320-2 is used with all motor modules or line modules for both single and multi-motor drives.
Different versions of these control units include:
All of these control units are based on an object-oriented SINAMICS software called SIMOTION. The firmware included contains all common control modes and can be scaled to meet almost all automation requirements. This firmware will contain instructions for infeed controls for main infeeds, and all vector an servo controls.
Does your Siemens SINAMICS CU305, CU310-2, or CU320-2 control unit module need to be serviced? As with all of our services, our repairs come with a 12 month guarantee. Our repair service is based on doing the right job, and getting your part back to you as soon as possible. Every part we refurbish is tested to make sure they work the way they are supposed to. Our factory-trained technicians have many years working with Siemens products. Minimize your future downtime today by contacting MRO Electric and Supply right now.
For a free repair quote on CU305, CU310-2, and CU320-2 modules, please email firstname.lastname@example.org or call 800-691-8511. For more information on our Siemens repair capabilities, you can visit our Siemens Repair page.
There are two Sinamics S120 CU320 Modules. There is the CU320-2 DP, which is the 6SL3040-1MA00-0AA0, and the CU320-2 PN, which is the 6SL3040-1MA01-0AA0.
These multi-drive Control Units increase axis count and functionality. They have an Ethernet port, as well as more I/O and controller to controller communication. Each unit can manage up to 6 servo or vector axes in a high performance system. For standard systems, up to 12 V/Hz axes can be controlled from one CU320-2 unit. These Control Units significantly reduce system costs, as they increase functionality for positioning, safety integration, and drive control allowing all these functions to be controlled by one unit versus several. There is also additional flexibility with a high number of programming options and digital inputs. With up to 12 binary inputs, the modules’ high I/O count add ease of use. The additional Ethernet port expands programming options as well. Overall, the CU320-2 control units allow for simple yet flexible performance with minimal cost and space requirements.
The CU320-2 DP is a Sinamics Control Unit with a Profibus interface. It is a central Control Module in which the closed-loop and open-loop functions are implemented for one or more Line Modules and/or Motor Modules. It can be used with firmware version 4.3 or greater. It has 12 digital inputs, 8 digital inputs/outputs, 4 DRIVE-CLiQ interfaces, a Profibus and Ethernet interface, a serial interface (RS232), an option slot, and 3 measuring sockets.
MRO Electric stocks new and refurbished CU320-2 DP Control Units, which is part number 6SL3040-1MA00-0AA0. If you would like a replacement module, please call 800-691-8511 or email email@example.com.
The CU320-2 PN is a Sinamics S120 Control Unit without a Profibus interface. It has the same interfaces as described above, however without the Profibus port. It is also a central control unit with closed-loop and open-loop functions that can be implemented for one or more Line or Motor modules.
MRO Electric stocks new and refurbished CU320-2 PN Control Units, which is part number 6SL3040-1MA01-0AA0. If you would like a replacement module, please call 800-691-8511 or email firstname.lastname@example.org.