{"id":180,"date":"2015-04-24T18:01:29","date_gmt":"2015-04-24T18:01:29","guid":{"rendered":"http:\/\/www.mroelectric.com\/blog\/?p=180"},"modified":"2019-05-20T16:48:28","modified_gmt":"2019-05-20T20:48:28","slug":"fanuc-beta-drive-parameters","status":"publish","type":"post","link":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/","title":{"rendered":"Restoring FANUC Beta Drive Parameters"},"content":{"rendered":"

\"fanuc<\/h2>\n

Restoring FANUC Beta Drive Parameters<\/h2>\n

Some instructions to help out when replacing your drives and restoring the Fanuc beta drive parameters. With Beta series drives the parameters are stored in the drive so if you
\nreplace the drive the parameters will go with it. MRO Electric and Supply<\/a> maintains a comprehensive stock of new and used\u00a0FANUC Robotics Drives\u00a0<\/a>parts. If you need a replacement part, please call 800-691-8511 or email sales@mroelectric.com<\/a>.<\/p>\n

To save and restore Power Mate CNC Manager parameters to Beta Servo Drives<\/a>:<\/p>\n

This is required when replacing a Beta drive and applies to the following
\ncontrols. 16iA,18iA,21iA,16iB,18iB,21iB,20i,16,18,21,0i,Powe rate-iD and Powermate-iH.<\/p>\n

1. Make NC PRM 960.3 (PMN) = 0 (Enables PMM function).
\n2. Select where parameters are to be saved (to save to memory card on i series controls make PRM 960.2
\n(MD2) = 0 and PRM 960.1 (MD1) = 1, to save as a part program make PRM 960.1 = 0).
\n3. Set parameter 8760 to the program number you want the parameters to be stored as. Note 1.
\n4. Press the SYSTEM button then the RIGHT CHAPTER button until the Power Motion Manager screen is displayed.
\n5. Press the SYSTEM soft key.
\n6. Press the PARAM soft key.
\n7. Press the OPRT soft key.
\n8. Press the RIGHT CHAPTER button. READ and PUNCH soft keys will be displayed.
\n9. Select EDIT mode.
\n10.To save parameters from Beta drive to CNC press the READ soft key, press the ALL soft key then the EXEC soft key.
\n11.To restore the parameters from the CNC to the Beta drive press the PUNCH soft key, press the ALL soft key, then the EXEC soft key.<\/p>\n

Be sure to check out our A06B-6105-H002 – FANUC Robotics R-2000iA Servo Amplifier<\/a> product page to get the best deals.<\/p>\n","protected":false},"excerpt":{"rendered":"

Restoring FANUC Beta Drive Parameters Some instructions to help out when replacing your drives and restoring the Fanuc beta drive parameters. With Beta series drives the parameters are stored in the drive so if you replace the drive the parameters will go with it. MRO Electric and Supply maintains a comprehensive stock of new and […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":"","_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"ngg_post_thumbnail":0,"footnotes":""},"categories":[77,497,12],"tags":[],"class_list":["post-180","post","type-post","status-publish","format-standard","hentry","category-fanuc","category-robotics-applications","category-troubleshooting-and-repair"],"yoast_head":"\nRestoring Fanuc Beta Drive Parameters - Information and Tips<\/title>\n<meta name=\"description\" content=\"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Restoring FANUC Beta Drive Parameters\" \/>\n<meta property=\"og:description\" content=\"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\" \/>\n<meta property=\"og:site_name\" content=\"MRO Electric Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/mroelectric\/\" \/>\n<meta property=\"article:published_time\" content=\"2015-04-24T18:01:29+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2019-05-20T20:48:28+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg\" \/>\n<meta name=\"author\" content=\"Joe Kaminski\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@mroelectric\" \/>\n<meta name=\"twitter:site\" content=\"@mroelectric\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Joe Kaminski\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\"},\"author\":{\"name\":\"Joe Kaminski\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/b993515a2417163a23dfe88597c8d13a\"},\"headline\":\"Restoring FANUC Beta Drive Parameters\",\"datePublished\":\"2015-04-24T18:01:29+00:00\",\"dateModified\":\"2019-05-20T20:48:28+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\"},\"wordCount\":291,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg\",\"articleSection\":[\"Fanuc\",\"Robotics Applications\",\"Troubleshooting & Repair\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\",\"name\":\"Restoring Fanuc Beta Drive Parameters - Information and Tips\",\"isPartOf\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg\",\"datePublished\":\"2015-04-24T18:01:29+00:00\",\"dateModified\":\"2019-05-20T20:48:28+00:00\",\"description\":\"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg\",\"contentUrl\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg\",\"width\":400,\"height\":318,\"caption\":\"fanuc robotics\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.mroelectric.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Restoring FANUC Beta Drive Parameters\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#website\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/\",\"name\":\"MRO Electric Blog\",\"description\":\"Applications of PLCs, CNCs, and more!\",\"publisher\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.mroelectric.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#organization\",\"name\":\"MRO Electric and Supply\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro-logo-new_large2_blue-1.png\",\"contentUrl\":\"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro-logo-new_large2_blue-1.png\",\"width\":430,\"height\":222,\"caption\":\"MRO Electric and Supply\"},\"image\":{\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/mroelectric\/\",\"https:\/\/x.com\/mroelectric\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/b993515a2417163a23dfe88597c8d13a\",\"name\":\"Joe Kaminski\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/fb7c0d641ed541ad912b27609e8079304fc356be7b5b53578b32ad3fa973f506?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/fb7c0d641ed541ad912b27609e8079304fc356be7b5b53578b32ad3fa973f506?s=96&d=mm&r=g\",\"caption\":\"Joe Kaminski\"},\"description\":\"Joe Kaminski is an industrial automation specialist at MRO Electric. He has a background in industrial engineering and supply chain management. Joe has worked in the automation industry for over 10 years providing support to some of the largest companies in the world. For more info, visit www.mroelectric.com.\",\"url\":\"https:\/\/www.mroelectric.com\/blog\/author\/jadmin\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Restoring Fanuc Beta Drive Parameters - Information and Tips","description":"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/","og_locale":"en_US","og_type":"article","og_title":"Restoring FANUC Beta Drive Parameters","og_description":"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.","og_url":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/","og_site_name":"MRO Electric Blog","article_publisher":"https:\/\/www.facebook.com\/mroelectric\/","article_published_time":"2015-04-24T18:01:29+00:00","article_modified_time":"2019-05-20T20:48:28+00:00","og_image":[{"url":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg","type":"","width":"","height":""}],"author":"Joe Kaminski","twitter_card":"summary_large_image","twitter_creator":"@mroelectric","twitter_site":"@mroelectric","twitter_misc":{"Written by":"Joe Kaminski","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#article","isPartOf":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/"},"author":{"name":"Joe Kaminski","@id":"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/b993515a2417163a23dfe88597c8d13a"},"headline":"Restoring FANUC Beta Drive Parameters","datePublished":"2015-04-24T18:01:29+00:00","dateModified":"2019-05-20T20:48:28+00:00","mainEntityOfPage":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/"},"wordCount":291,"commentCount":0,"publisher":{"@id":"https:\/\/www.mroelectric.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg","articleSection":["Fanuc","Robotics Applications","Troubleshooting & Repair"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/","url":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/","name":"Restoring Fanuc Beta Drive Parameters - Information and Tips","isPartOf":{"@id":"https:\/\/www.mroelectric.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage"},"image":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg","datePublished":"2015-04-24T18:01:29+00:00","dateModified":"2019-05-20T20:48:28+00:00","description":"Tips to help restore Fanuc beta drive parameters after replacing your unit. MRO Electric supplies repairs and spares for all FANUC CNC equipment.","breadcrumb":{"@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#primaryimage","url":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg","contentUrl":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro_fanucservoamps.jpg","width":400,"height":318,"caption":"fanuc robotics"},{"@type":"BreadcrumbList","@id":"https:\/\/www.mroelectric.com\/blog\/fanuc-beta-drive-parameters\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.mroelectric.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Restoring FANUC Beta Drive Parameters"}]},{"@type":"WebSite","@id":"https:\/\/www.mroelectric.com\/blog\/#website","url":"https:\/\/www.mroelectric.com\/blog\/","name":"MRO Electric Blog","description":"Applications of PLCs, CNCs, and more!","publisher":{"@id":"https:\/\/www.mroelectric.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.mroelectric.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.mroelectric.com\/blog\/#organization","name":"MRO Electric and Supply","url":"https:\/\/www.mroelectric.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mroelectric.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro-logo-new_large2_blue-1.png","contentUrl":"https:\/\/www.mroelectric.com\/blog\/wp-content\/uploads\/mro-logo-new_large2_blue-1.png","width":430,"height":222,"caption":"MRO Electric and Supply"},"image":{"@id":"https:\/\/www.mroelectric.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/mroelectric\/","https:\/\/x.com\/mroelectric"]},{"@type":"Person","@id":"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/b993515a2417163a23dfe88597c8d13a","name":"Joe Kaminski","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mroelectric.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/fb7c0d641ed541ad912b27609e8079304fc356be7b5b53578b32ad3fa973f506?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/fb7c0d641ed541ad912b27609e8079304fc356be7b5b53578b32ad3fa973f506?s=96&d=mm&r=g","caption":"Joe Kaminski"},"description":"Joe Kaminski is an industrial automation specialist at MRO Electric. He has a background in industrial engineering and supply chain management. Joe has worked in the automation industry for over 10 years providing support to some of the largest companies in the world. For more info, visit www.mroelectric.com.","url":"https:\/\/www.mroelectric.com\/blog\/author\/jadmin\/"}]}},"modified_by":"Brian Hughes","_links":{"self":[{"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/posts\/180","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/comments?post=180"}],"version-history":[{"count":9,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/posts\/180\/revisions"}],"predecessor-version":[{"id":3698,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/posts\/180\/revisions\/3698"}],"wp:attachment":[{"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/media?parent=180"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/categories?post=180"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mroelectric.com\/blog\/wp-json\/wp\/v2\/tags?post=180"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}