Same Day ShippingWeight: Ask
Want it shipped today?
- Order in the next 14 hours and 18 minutes.
- If you order between 4pm and 6pm EST, you will be charged a small rush fee.
Shipping options vary by location. Call for an accurate quote.
- 140ACI03000 Warranty: 2 Years for new, remanufactured or repair
- Inquire about exchanging your faulty 140ACI03000 for credit when ordering from MRO Electric
More Info on the 140ACI03000
Quantum | 140ACI03000 | Modicon | 140 ACI 030 00 | Analog Input DC 8 CHNL 12 BIT 1 POLE
The Modicon Quantum automation platform supports a full range of analog I/O modules designed to interface with a wide variety of field devices. All modules meet internationally accepted IEC electrical standards that ensure reliability in harsh operating environments. For even better protection and extended life in extremely harsh environments, you can have your modules conformally coated. All Quantum I/O modules can be completely configured using Unity Pro, Concept or ProWORX. The ability to specify an I/O address for each module in software makes it easy to add or change modules in your configuration without physically changing the application program.
140ACI03000 wiring diagram
Modicon Quantum 140ACI03000 PDF manual available online.
|Type of filter:||Single pole low pass - 3 dB at 15 Hz +/- 20 %|
|Analogue input number:||8|
|Addressing requirement:||9 input words|
|Analogue input resolution:||12 bits|
|Linear measuring range:||1...5 V|
|Absolute maximum input:||50 V DC|
|Input impedance:||250 Ohm current +/- 0.01 %|
|> 20 MOhm voltage|
|Absolute accuracy error:||+/- 0.1 % of full scale maximum|
|+/- 0.05 % of full scale|
|Linearity error:||+/- 0.04 %|
|Accuracy drift according to temperature:||<= 0.005 % of full scale/°C|
|+/- 0.0025 % of full scale/°C|
|Common mode rejection:||> -72 dB 60 Hz|
|Isolation between channels and bus:||3000 V DC for 60 s|
|1000 V DC|
|Isolation between channels:||30 V DC|
|Update time:||5 ms|
|Fault type:||Undervoltage range 1...5 V|
|Broken wire 4...20 mA|
|Local signalling:||8 LEDs red channel fault|
|8 LEDs green channel is turned on|
|1 LED red external fault|
|1 LED green bus communication is present (Active)|
|Bus current requirement:||240 mA|
|Power dissipation in W:||2 W|